Available in both standard and wide peak in all sizes
FSC sustainably sourced and recycled packaging
How to fit:
Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting.
Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure. Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.
Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.
The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident. When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.
Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.
The Kylo exudes quality, style and comfort with an easy-to-fit precision dial-fit system. Complete with a removable washable headband.
Certified to three international safety standards.
Available in both navy and black colourways with a high-quality matte or gloss finish.
Available in both standard and wide peak in all sizes
FSC sustainably sourced and recycled packaging
How to fit:
Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting.
Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure.
Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.
Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.
The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident.
When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.
Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.
The Kylo exudes quality, style and comfort with an easy-to-fit precision dial-fit system. Complete with a removable washable headband.
Certified to three international safety standards.
Available in both navy and black colourways with a high-quality matte or gloss finish.
Available in both standard and wide peak in all sizes
FSC sustainably sourced and recycled packaging
How to fit:
Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting.
Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure.
Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.
Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.
The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident.
When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.
Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.
Your favourite Kylo is back and bolder with stunning new colour-ways and finishes!
Whether you opt for the refined Navy Matte with Rose Gold these deliver style for every rider.
The Kylo continues to deliver the premium safety features you expect from Charles Owen. Certified to three international safety standards.
Featuring the precision dial-fit system to ensure a snug and customised fit.
Its lightweight design and extensive ventilation allow for comfort in all weathers.
The removable washable headband and quick-release buckle make it as practical as it is stylish.
The glam trend! The new uvex collection plays with combinations of matt and glossy materials. The uvex suxxeed starshine is a shining example of successful pairing of a sporty clean look with the glamour so beloved by riders everywhere. The coated shell of this sporty classic features the sparkle we’ve come to know and love from suxxeed glamour. With this combination, the uvex starshine brings pizzazz to any outfit.
New combo, new style. The suxxeed starshine combines a popular glamour top with a sporty-matt coated shell. Add a glossy frame, and a new style of helmet is born. The designs of the uvex equestrian 2019/20 collection feature new material combinations. This helmet is made to radiate appeal. Navy, black or anthracite with rosé: colour combinations that are perfect matches for any competition outfit. Swarovski® crystals on the frame make this glamorous, sporty helmet perfect for any discipline.
This classic design is what makes the uvex suxxeed helmet so successful. Made with innovative hardshell technology with a moulded outer shell and EPS inner shell. A highly effective combination to offer outstanding protection: impact-resistant on the outside, shock-absorbing on the inside. The helmet interior features the uvex temperature regulation system to keep your head cool. The helmet’s handy uvex monomatic closure, R FAS strap system and IAS 3D size adjustment allows it to be fit, multi-dimensionally and to the millimetre, to the shape of your head.
The interior, specially designed for riders, is moisture-transporting, anti-bacterial, anti-allergenic, removable and washable.
Some sizes are on backorder - these orders will take 2-3 weeks
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.AcceptRead More
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.