Charles Owen

Showing all 7 results

Charles Owen 4Star Riding Hat
Charles Owen 4Star Riding Hat
AS A NEW CHARLES OWEN STOCKIST WE ARE AWAITING MORE STOCK, BUT PLEASE DO CONTACT US WITH ANY QUESTIONS OR IF YOU ARE LOOKING FOR SOMETHING SPECIFIC. Designed for the extreme situation, the 4Star cross-country skull is certified to four top international safety standards. A technically superior helmet, the deep-fitting 4Star is the result of years of advanced computer analysis and incorporates the latest technology with a fibre-reinforced shell for improved crush resistance. It features the patented GRpx® harness system for the ultimate in stability. The 4Star helmet also has the innovative Charles Owen “Free Fit” ventilation system, which allows for increased airflow across the forehead. It combines a frontal air channel with Coolmax® mesh to significantly increase cooling and evaporation of sweat. Add this to the 10 ventilation slots, and the option of heat-reflective silver finish, and the 4Star provides the coolest ride yet. Perfectly finished with a ventilated silk, the 4Star helmet is the ultimate choice for eventing and the safety-conscious rider. NEW! The 4Star now features a magnetic harness clasp for effortless closure so that the helmet can be buckled with just one hand. The clasp features a unique tab that the rider simply has to pull to instantly release the harness, making it quick and easy to take the helmet on and off without sacrificing the incredible security and stability required of a high performance cross-country skull.

Skull cap features

  • Our safest ever helmet
  • Deep fit protects more of the head
  • Front and rear ventilation
  • ‘Free Fit’ system
  • Soft GRpx® technology harness
  • Magnetic harness clasp
  • Heat-reflective finish (Silver)
  • Meets four safety standards
  • Free ventilated silk
not rated £192.00 – £230.00 inc. VAT Select options
Charles Owen Esme MS1 Pro Riding Hat
Charles Owen Esme MS1 Pro Riding Hat
AS A NEW CHARLES OWEN STOCKIST WE ARE AWAITING STOCK BUT PLEASE CONTACT US WITH ANY QUESTIONS OR IF YOU WOULD LIKE ANYTHING SPECIFIC. The Esme MS1 Pro combines triple standard protection (including PAS 015) with MIPS technology and a lightweight strengthened ABS outershell. Riders are offered the highest level of protection for all disciplines, with an independent test rating the MS1 Pro to be 37% safer than other helmets on the market (Folksam 2021). Ten ventilation slots and a removable washable headband add to the comfort and functionality of this new jockey skull. Finished in a graphite grey paint, with rose gold emblem badge. Supplied with a free THIS ESME hat silk.

Features

  • MIPS technology
  • 10 ventilation slots
  • Washable and replaceable headband
  • Sized anti-microbial lining
  • Leather-look harness
  • Meets multiple safety standards
  • Round Fit available in sizes 56-58cm.
  • Free This Esme Signature hat silk
  • Limited edition Esme collection
  • FSC sustainably sourced and recycled packaging
  • Made in the UK
Before ordering, please follow the fitting guide from Charles Owen. It is very important that you measure your head correctly to ensure the correct size.
not rated £155.00 – £186.00 inc. VAT Select options
Charles Owen Kylo Black Gloss Riding Hat
Charles Owen Kylo Black Gloss Riding Hat
The Kylo exudes quality, style and comfort with an easy-to-fit precision dial-fit system. Complete with a removable washable headband. Certified to three international safety standards. Available in both navy and black colourways with a high-quality matte or gloss finish.

Features:

  • Dial-adjustable precision fit
  • Lightweight
  • Flexible peak
  • Extensive ventilation to maximise cooling
  • Fully adjustable, leather-look harness
  • Quick-release harness buckle
  • Machine washable wicking fabric removable headband
  • Available in both standard and wide peak in all sizes
  • FSC sustainably sourced and recycled packaging

How to fit:

  1. Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting.
  2. Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure. Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
  3. Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.
  4. Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.
  5. The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
  6. One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident. When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.
  7. Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.
dial fit riding helmet   https://youtu.be/HNskme2a3fQ
not rated £96.00 – £120.00 inc. VAT Select options
Charles Owen Kylo Black Matte Riding Hat
Charles Owen Kylo Black Matte Riding Hat
The Kylo exudes quality, style and comfort with an easy-to-fit precision dial-fit system. Complete with a removable washable headband. Certified to three international safety standards. Available in both navy and black colourways with a high-quality matte or gloss finish.

Features:

  • Dial-adjustable precision fit
  • Lightweight
  • Flexible peak
  • Extensive ventilation to maximise cooling
  • Fully adjustable, leather-look harness
  • Quick-release harness buckle
  • Machine washable wicking fabric removable headband
  • Available in both standard and wide peak in all sizes
  • FSC sustainably sourced and recycled packaging

How to fit:

  1. Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting.
  2. Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure. Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
  3. Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.
  4. Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.
  5. The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
  6. One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident. When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.
  7. Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.
dial fit riding helmet   https://youtu.be/HNskme2a3fQ
not rated £88.00 – £110.00 inc. VAT Select options
Charles Owen Kylo Navy Gloss Riding Hat
Charles Owen Kylo Navy Gloss Riding Hat
The Kylo exudes quality, style and comfort with an easy-to-fit precision dial-fit system. Complete with a removable washable headband. Certified to three international safety standards. Available in both navy and black colourways with a high-quality matte or gloss finish.

Features:

  • Dial-adjustable precision fit
  • Lightweight
  • Flexible peak
  • Extensive ventilation to maximise cooling
  • Fully adjustable, leather-look harness
  • Quick-release harness buckle
  • Machine washable wicking fabric removable headband
  • Available in both standard and wide peak in all sizes
  • FSC sustainably sourced and recycled packaging

How to fit:

  1. Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting.
  2. Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure. Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
  3. Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.
  4. Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.
  5. The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
  6. One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident. When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.
  7. Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.
dial fit riding helmet   https://youtu.be/HNskme2a3fQ
not rated £96.00 – £120.00 inc. VAT Select options
Charles Owen Kylo Navy Matte Riding Hat
Charles Owen Kylo Navy Matte Riding Hat
The Kylo exudes quality, style and comfort with an easy-to-fit precision dial-fit system. Complete with a removable washable headband. Certified to three international safety standards. Available in both navy and black colourways with a high-quality matte or gloss finish.

Features:

  • Dial-adjustable precision fit
  • Lightweight
  • Flexible peak
  • Extensive ventilation to maximise cooling
  • Fully adjustable, leather-look harness
  • Quick-release harness buckle
  • Machine washable wicking fabric removable headband
  • Available in both standard and wide peak in all sizes
  • FSC sustainably sourced and recycled packaging

How to fit:

  1. Place the helmet on the head and hold roughly 1cm above the eyebrow, at its loosest setting.
  2. Whilst holding the peak in place, begin to slowly tighten the dial fixing at the back of the helmet until secure. Please tighten your dial-fit carefully. Over-tightening of the dial-fit mechanism when the helmet is being worn may cause the dial to lock. If this occurs, simply remove the helmet and release the dial.
  3. Check the fit by gently pulling down on the peak or front of the helmet. The skin above the eyebrows should move with the motion of the helmet if it fits correctly. Independent movement from the helmet is an indication the helmet is too big or the dial is not fastened tight enough.
  4. Due to the dial-fit securing the helmet at the base of the skull (occipital ridge), consistent contact around the perimeter of the helmet is not necessary.
  5. The chin strap should fit just under the chin and gently touch the bottom of the ear lobe, avoiding the throat.
  6. One finger’s width should be between the chin and the chin strap. The gap between the chin and the chin strap indicates how far the helmet could move in an accident. When doing the chin strap up, place your finger between the strap and your chin to ensure you don’t pinch.
  7. Before removing the helmet, you should undo the dial. This helps prevent unnecessary stress on the dial fixing and ensures you are securing it correctly with every wear.
dial fit riding helmet   https://youtu.be/HNskme2a3fQ
not rated £88.00 – £110.00 inc. VAT Select options
Charles Owen Riding hat Cleaner & Deodoriser
Charles Owen Riding hat Cleaner & Deodoriser
new eco-friendly formula combines our helmet cleaner and deodoriser into one pump-action spray bottle. This specially formulated spray breaks up dirt and grease. It effectively removes sweat, sunscreen, makeup and dust to ensure your helmet and headband remain clean and fresh over the course of its lifetime. Leaves a refreshing lemon & grapefruit fragrance. 250ML
not rated £12.00 inc. VAT Add to basket